Piles drilling machine FD 100

Hydraulic Rotary Rig

The hydraulic rotary rig FD 100 mounted on NEW HOLLAND E215 EVOLUTION base carrier has been projected to perform the following works:
• drilled piles with dry or bentonite system
• C.F.A. piles (Continuous Flight Auger)

The piles drilling machine FD 100 is perfect for drilling piles with a maximum diameter of 1200 mm and a drilling depth of 40 mm.
The continuous helix (C.F.A.) can reach a maximum drilling depth of 16 m and a maximum pull (sheaved) of 320 kN, for the foundation of piles with a maximum diameter of 600 mm.

DRILLING PILE DIAMETER

Max diameter of poles	1200 mm
Max reachable depth	40 mm

C.F.A. (Continuous Flight Auger)

Max reachable depth	16 m
Max reachable depth (with pulielica without ext.)	14.2 m
Max diameter of poles	600 mm
Extraction force	320 kN

UNDERCARRIAGE

Total length	4510 mm
Skates length	600 mm
Total length (tracked open)	3700 mm
Total length (crawler retracted)	2500 mm
Ground pressure	0,067 mm

DIESEL ENGINE

Diesel engine	type CNHFABE8604B
Nominal installed power	118-2150 rpm Kw (Hp)

HYDRAULIC PUMPS

Main pumps	2x210 lt/min
Auxiliary pumps	22 lt/min
Maximum working pressure	32 MPa

MAIN WINCH

Nominal pull at 1st layer	100 kN
Nominal speed of the rope at the 1st layer	59 m/min
Rope diameter	22 mm

AUXILIARY WINCH

Nominal pull at 1st layer	60 kN
Nominal speed of the rope at the 1st layer	55 m/min
Rope diameter	16 mm

ROTARY TABLE

Max nominal torque	100 kNm
Max spin off speed	137 rpm
Max drilling speed	30 rpm
Max pull / push force on the kelly	135/103kN
Pull down stroke	3500 mm

WEIGHTS & DIMENSIONS

Width in transport position	2500 mm
Height in transport position	3242 mm
Length in transport position	12180 mm
Weight during the work phases	33 ton
Transport weight with assembled rod pack	33 ton