Piles drilling machine FD 120

Hydraulic Rotary
The hydraulic rotary FD120 mounted on NEW HOLLAND MH 6.6 base carrier has been projected to perform the following jobs:
• bored pile, with dry or bentonite system
• C.F.A. piles (Continuous Flight Auger)

The piles drilling machine FD 120 is perfect for drilling piles with a maximum diameter of 1500 mm and a drilling depth of 48 mm.
The continuous helix (C.F.A.) can reach a maximum drilling depth of 16 m and a maximum pull (sheaved) of 480 kN, for the foundation of piles with a maximum diameter of 600 mm.

DRILLING PILE DIAMETER

Max pile diameter1500 mm
Max pile depth48 mm

C.F.A. (Continuous Flight Auger)

Max pile depth16 m
Max pile depth (with auger cleaner without ext.)14.20 m
Max pile diameter600 mm
Extraction force480 kN

UNDERCARRIAGE

Overall length5190 mm
Track shoe width700 mm
Overall width (extended side frames)3900 mm
Overall width (retracted side frames)2500 mm
Ground pressure0,074 mm

DIESEL ENGINE

Diesel enginetype
CUMMINS/IVECO6BTA5.9C
Installed power rating129-2000 rpm Kw (Hp)

HYDRAULIC PUMPS

Main pumps2x195 lt/min
Auxiliary pumps140 lt/min
Max working pressure30 MPa

MAIN WINCH

1 layer nominal line pull120 kN
1 layer nominal rope speed60 m/min
rope diameter22 mm

AUXILIARY WINCH

1 layer nominal line pull60 kN
1 layer nominal rope speed40 m/min
rope diameter17 mm

ROTARY TABLE

Max nominal torque120 kNm
Max spin off speed140 rpm
Max drilling speed7-28 rpm
Pull/push cylinder200/160kN
Pull Down stroke3500 mm

WEIGHTS & DIMENSIONS

Transport width2500 mm
Transport height3400 mm
Transport lenght12410 mm
Operation weight42 ton